Mini set Roger Technology H30 / 640 for sliding gates weighing up to 600 kg with mechanical limit switches

  • 318.00€

Roger Technology H30 / 640 mini set for sliding gates weighing up to 600 kg with mechanical limit switches


  1. Microprocessor logic provides a wide range of specialized control functions to meet the requirements of the most demanding customer. For additional protection against adverse external influences, the electronic board is covered with a plastic cover.
  2. Safe operation of the gate is realized with the help of an electronic encoder that constantly monitors the movement of the leaf and ensures that it stops or reverses in the presence of an obstacle. In addition, it allows you to activate the soft stop modes of the gate at the end of the opening and closing cycles.
  3. A self-locking gearbox ensures that the gate is locked, eliminating the need to install additional locks. If there is no voltage in the power supply for manual opening of the gate, a practical release handle is provided, which can be washed with a personal key.
  4. The position relative to the mounting base is adjusted by steel pins at six points. The elongated shape of the slots for the anchor bolts allows you to change the contact area of ​​the drive gear with the gate rack. Thus, absolute stability and absence of vibrations in the system is achieved.
  5. Free rotation of the drive shaft of the gearbox is ensured by the use of radial rolling bearings. To reduce friction, and, consequently, heating and wear of parts, the worm screw and the intermediate gear are made, respectively, of steel and bronze, significantly increasing the efficiency of the drive.
  6. On gates with automated drives with mechanical limit switches, ice build-up on the rack, formed in adverse weather conditions, can cause the gate stop position to shift. Such accidents are excluded for models of the H30 series, equipped with magnetic tips. The permanent magnets position the end points of the sash travel absolutely reliably and precisely.



Equipment:

  • Self-locking drive Roger H30 / 643
  • Roger H70 / 104AC 230V control board
  • Built-in 2-channel receiver Roger H93 / RX22A / I
  • Roger E80 / TX52R / 2 remote control - 2 pcs.
Specifications
Continuous working time 4 min
Engine force, N 300
Gate movement speed, m / min 9.5
Gate weight, kg 600
Gate width, m 8
Intensity, % 40
Manufacturer country Italy
Power consumption 3 А
Power supply, V 230
Power, W 240
Protection degree, IP 43
Series Roger H30
Thermal protection, ° C 150
Type Set
Working temperature, ° C -25 ... +70 °C

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products